Comments: This build started out as a LP Type/Singlecut kit. I added a set of Seymour Duncan P-Rails and Triple Shot mounts, as well as a Roland GK-KIT-GT3 internal kit, which require routing the cavity to enable mounting the additional controls and provide a place for the Roland electronics to reside. I also installed a set of push pull pots for the bridge and neck volumes to add phase and series connection options for the P-Rails. I also had to drill an additional hole to mount an aftermarket 13 pin jack for the Roland, and I replaced the stock1/4 in jack with a switchcraft one so that I could separate the normal output from the 13 pin jack if I wanted to. The color is Black Keda Dyes with 6 coats of Tru-Oil for some gloss without being overly shiny or slippery. The attached picture also shows the Roland VG-88 and one of my amplification systems that I use with it.
Find the Single Cut style build your own guitar kit here.